Fractal Design is documented for its iconic compact ITX cases just like the Node 202 and therefore the recent Era ITX, also as Mid-tower ATX cases just like the Define family, but the new Meshify 2 XL is one among the few Full Tower ATX cases. Starting with the Define 7 XL’s internal design with the combining the Meshify’s unique aesthetic, the Meshify 2 XL provides a spacious interior, improved airflow, and room for up to 23 internal drives. Add in support for up to 480mm radiators or up to 11 120mm fans, top-end builds can stay cool. With this type of space, even the foremost extreme enthusiast and enterprise builds can close with no compromise.
|Motherboard Support||Mini-ITX, Micro-ATX, ATX, E-ATX (285 mm)|
|Dimensions (HxWxD)||18.7 x 9.45 x 21.34 inches (474 x 240 x 542mm)|
|Max GPU Length||18.4 inches (467 mm)|
|CPU Cooler Height||7.3 inches (185 mm)|
|Max PSU Length||13.9 inches (353 mm)|
|Internal Bays||11x 3.5-inch (6 brackets included)|
|Expansion Slots||7x + 2x Vertical|
|Front I/O||2x USB 3.0, USB-C, 3.5 mm headphone, 3.5mm mic|
|Other||Tempered Glass Panel, Fan Controller|
|Front Fans||2x 140 mm (Up to 3x 140mm, 3x 120mm)|
|Rear Fans||1x 140mm (Up to 1x 140mm)|
|Top Fans||None (Up to 4x 140mm)|
|Bottom Fans||Up to 2x 140 mm|
Touring round the outside of the chassis, it’s clear that the Meshify 2 may be a Fractal Design chassis. It makes it easy on the styling, offering a somewhat minimalist approach, with the foremost eccentric detail being the creases within the mesh.
The front IO resides at the highest of the chassis and comprises individual headphone and mic jacks, a USB Type-C port, power and reset switches, and therefore the mandatory dual USB 3.0 ports.
Removing the panels from the Meshify 2 is simpler than in most cases. On the rear, you merely pull the tab outwards, which pulls the pegs at the highest of the left and right side panels out from their clamps. The panels then swivel out and may be lifted off the chassis. to place them back on, you merely place rock bottom of the panel into place and push the highest to shut it – that’s it.
The front mesh filter comes off even as easily— pull it open using the Fractal logo as a handle. the highest cover also pulls right off, revealing the dust filter underneath. We particularly appreciate how easy it’s to get rid of the panels, as this makes it a breeze to strip the case right down to its bare skeleton for straightforward access to all or any the spots you’ll got to get to during assembly.
4. Internal Layout
The ease of removing the panels is merely a glimpse of Fractal Design Meshify 2 great PC case design skills. Opened up, the Meshify 2 features a whole host of features internally that set it apart within the market, so let’s undergo a couple of of them.
Starting off, the most motherboard area is sweet for up to an ATX-size motherboard. you’ll prefer to install wider E-ATX boards up to 285mm in breadth , but these will cover the cable grommets and thus you’ll need to find a special method to route cables (switch to the storage layout).
Flip over to the opposite side, and you’ll find the cable management area. At the highest, you’ll spot a lover controller, which has six 3-pin voltage-control headers alongside three 4-pin PWM headers. But, note that the 3-pin headers here only offer constant voltage, so you’ll want to plug the included fans into your motherboard if you would like to regulate their speeds – this module is more of a 3-port PWM splitter.
Back here there’s room for 2 SSDs on the rear of the motherboard tray, and a plastic trim piece covers up the PSU area. Remove this piece, and you’ll spot room for 2 3.5-inch hard drives and therefore the longest of power supplies. But what that support for up to 11 3.5-inch drives that Fractal Design is talking about?
Spot that massive plastic slab that’s ahead of the motherboard? If you’re building a system that doesn’t use quite four 3.5-inch drives, you’ll leave it where it’s as you’ll mount a 3rd 3.5-inch drive on the ground of the PSU area too, also as on the rear of this partition.
Leaving it there’ll offer room to mount a tube reservoir, that mounting points are supplied on a removable cover piece to the PSU area. A separate part of this cover piece is often removed to form a way for extended radiators.
But, by removing just five screws, you’ll remove the side partition and bump it over to the left side of the chassis to modify to the storage layout. Three of those screws are accessible from the front, one from up top and one on rock bottom , inside. This last one is that the trickiest to urge to once you move the partition over to the present site, but Fractal Design cut a hole within the front panel that you simply can guide your screwdriver through to succeed in it, and therefore the entire panel fits seamlessly into place.
Then, flip to the opposite side, and you’ll install up to eight additional hard drives, though only four trays are included within the accessory box.
However, despite offering room for up to eight more hard drives for a complete of up to 11 3.5-inch drives, at the front, there’s still room to deal with fans and a radiator provided the radiator isn’t too thick.
Up to the partition, graphics cards are often 315 mm long, which is plenty for many cards. Assuming you don’t have a radiator, hard drives, or reservoir blocking access, GPUs are often up to 467mm long before bumping into the intake fans. Just note that within the storage layout (with the partition moved), GPUs can only be up to 150mm wide if you plan on pushing it into that space.
5. That Accessory Box Though
The Fractal Design Meshify 2 comes with possibly the most important accessory box ever for a PC case. It’s unnecessarily enormous because most of it’s empty. Inside you’ll find the four additional HDD trays, a smaller accessory box with all the screws and bits, and a really detailed manual that covers all the case’s features and the way to use them. At the time of scripting, this manual isn’t available online, but if you plan on building a system during this chassis that pushes it to its limits, the manual is often very helpful in planning your build to seek out the case’s possibilities and limitations.
The screws and bits include plenty of rubber grommets to mount the HDDs with, to make sure there’s some vibration damping, and Fractal Design even goes thus far to incorporate one extra motherboard standoff to exchange the central anchoring standoff, just in case you would like to exchange it for one that you simply can turn a screw into. You’ll also find a screw to secure the tempered-glass side panel for once you got to transport the case without its box. and many of zip ties also are included.
Being a mesh-fronted chassis, the Fractal Design Meshify 2 is all about airflow and cooling. Fractal Design Meshify 2 includes three 140mm fans from the factory, which can be plenty for the overwhelming majority of builds, with one at the rear exhaust and two as front intake.
You can prefer to install another 140mm spinner within the front, three at the highest, and two at rock bottom intake (with the required sacrifices which will take, like removing the disk drive cage). Alternatively, an equivalent number of 120mm fans fit.
However, radiators need a touch more clearance, so you’ll fit up to a 120mm radiator at the rear exhaust, a 420mm radiator at the highest (limited to 360 within the storage layout), a 360mm radiator at the front, and a 140mm radiator at rock bottom. Again, note that if you would like to maximize radiator space, you’ll need to sacrifice either the most important size at the highest or the most important size at the front intake to make sure the radiators clear one another.
Dust filters are provided at the highest , front, and bottom intake, though you’ll prefer to remove the highest filter if you’re exhausting here to enhance radiator performance without a dust-buildup penalty.
For custom loops, a fill port mount location is provided within the top fan bracket with a 25.4mm (1-inch) diameter.
You may also like:
1. New Amazing Lian Li Lancool II Mesh Case 2020-2021 Review
2. Best Phanteks Eclipse P300A Review 2021